A full decompilation and automatic security analysis of all contracts on the Ethereum and the Fantom blockchains. Updated hourly with new contracts uploaded to both networks. Analysis results by Dedaub.

Contract Library by Dedaub

USDC

VERSION

WETH

_factory

_router

addRouter

customRouter

factoryToRouter

fromToken

toToken

amount

getBestSwapPath

routerType

unirouter

path

_bestSwapPath

_fromToken

_toToken

_unirouter

getSwapPath

_swapUniV2Path

getWhitelistedAddresses

owner

renounceOwnership

_path

reversePath

routerToType

routers

lpToken

router

setCustomRouter

setSwapPath

_token

sweepERC20

newOwner

transferOwnership

_fromLpToken

_amountLpIn

_minAmountOut

unzapFromLp

_matrixVault

_withdrawAmount

unzapFromMatrix

validRouter

_toLpToken

_amountIn

_minLpAmountOut

zapToLp

zapToMatrix

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

Address.sol

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

Context.sol

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        assembly {
            result := store
        }

        return result;
    }
}

EnumerableSet.sol

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

IERC20.sol

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

IERC20Metadata.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.8.9;

import "IERC20.sol";

interface IMatrixVault is IERC20 {

    function want() external view returns (address);

    function deposit(uint256) external;

    function withdraw(uint256 _shares) external;

}

IMatrixVault.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.8.9;

interface ISolidlyRouter {
    struct route {
        address from;
        address to;
        bool stable;
    }

    function getAmountOut(
        uint256 amountIn,
        address tokenIn,
        address tokenOut
    ) external view returns (uint256 amount, bool stable);

    function getAmountsOut(uint256 amountIn, route[] memory routes) external view returns (uint256[] memory amounts);

    function swapExactTokensForTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        route[] calldata routes,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function addLiquidity(
        address tokenA,
        address tokenB,
        bool stable,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    )
        external
        returns (
            uint256 amountA,
            uint256 amountB,
            uint256 liquidity
        );

    function removeLiquidity(
        address tokenA,
        address tokenB,
        bool stable,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB);
}

ISolidlyRouter.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

IUniswapV2Factory.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.9;

interface IUniswapV2Pair {
  event Approval(address indexed owner, address indexed spender, uint value);
  event Transfer(address indexed from, address indexed to, uint value);

  function name() external pure returns (string memory);

  function symbol() external pure returns (string memory);

  function decimals() external pure returns (uint8);

  function totalSupply() external view returns (uint);

  function balanceOf(address owner) external view returns (uint);

  function allowance(address owner, address spender) external view returns (uint);

  function approve(address spender, uint value) external returns (bool);

  function transfer(address to, uint value) external returns (bool);

  function transferFrom(
    address from,
    address to,
    uint value
  ) external returns (bool);

  function DOMAIN_SEPARATOR() external view returns (bytes32);

  function PERMIT_TYPEHASH() external pure returns (bytes32);

  function nonces(address owner) external view returns (uint);

  function permit(
    address owner,
    address spender,
    uint value,
    uint deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;

  event Mint(address indexed sender, uint amount0, uint amount1);
  event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
  event Swap(
    address indexed sender,
    uint amount0In,
    uint amount1In,
    uint amount0Out,
    uint amount1Out,
    address indexed to
  );
  event Sync(uint112 reserve0, uint112 reserve1);

  function MINIMUM_LIQUIDITY() external pure returns (uint);

  function factory() external view returns (address);

  function token0() external view returns (address);

  function token1() external view returns (address);

  function getReserves()
    external
    view
    returns (
      uint112 reserve0,
      uint112 reserve1,
      uint32 blockTimestampLast
    );

  function price0CumulativeLast() external view returns (uint);

  function price1CumulativeLast() external view returns (uint);

  function kLast() external view returns (uint);

  function mint(address to) external returns (uint liquidity);

  function burn(address to) external returns (uint amount0, uint amount1);

  function swap(
    uint amount0Out,
    uint amount1Out,
    address to,
    bytes calldata data
  ) external;

  function skim(address to) external;

  function sync() external;

  function initialize(address, address) external;

  function stable() external returns (bool);
}

IUniswapV2Pair.sol

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

IUniswapV2Router01.sol

pragma solidity >=0.6.2;

import "IUniswapV2Router01.sol";

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

IUniswapV2Router02.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.8.9;

import "IERC20.sol";

interface IWETH is IERC20 {
    function deposit() external payable;

    function withdraw(uint256) external;
}

IWETH.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.9;

import "IUniswapV2Router02.sol";
import "IUniswapV2Factory.sol";
import "EnumerableSet.sol";
import "IERC20.sol";
import "SafeERC20.sol";
import "EnumerableSet.sol";
import "IUniswapV2Pair.sol";
import "ISolidlyRouter.sol";
import "console.sol";
import "IERC20Metadata.sol";

/// @title Swap Helper to perform swaps and setting routes in matrix zap
contract MatrixSwapHelperV2 {
    using SafeERC20 for IERC20;
    using EnumerableSet for EnumerableSet.AddressSet;

    address[] public routers;
    mapping(address => bool) public validRouter;

    /// @dev Enumerable set of external tokens and routers
    /// strategy can interact with
    EnumerableSet.AddressSet internal whitelistedAddresses;

    enum RouterType {
        UniV2,
        Solidly
    }

    struct SwapPath {
        RouterType routerType;
        address unirouter;
        address[] path;
    }

    mapping(bytes32 => SwapPath) internal swapPaths;

    constructor(address _uniRouter) {
        routers.push(_uniRouter);
        validRouter[_uniRouter] = true;
    }

    function getWhitelistedAddresses() public virtual returns (address[] memory) {
        return whitelistedAddresses.values();
    }

    function getSwapPath(
        address _fromToken,
        address _toToken,
        address _unirouter
    ) public view virtual returns (SwapPath memory _swapPath) {
        bytes32 _swapKey = keccak256(abi.encodePacked(_fromToken, _toToken, _unirouter));
        require(swapPaths[_swapKey].unirouter != address(0), 'path-not-found');
        return swapPaths[_swapKey];
    }

    function reversePath(address[] memory _path) public pure returns (address[] memory) {
        uint256 length = _path.length;
        address[] memory reversedPath = new address[](length);
        uint256 x = 0;

        for (uint256 i = length; i >= 1; i--) {
            reversedPath[x] = _path[i - 1];
            x++;
        }

        return reversedPath;
    }

    function _setSwapPath(
        address _fromToken,
        address _toToken,
        address _unirouter,
        address[] memory _path
    ) internal virtual {
        require(_path[0] == _fromToken, 'invalid-path');
        require(_path[_path.length - 1] == _toToken, 'invalid-path');
        require(_unirouter != address(0), 'invalid-router');

        _checkPath(_path);

        bytes32 _swapKey = keccak256(abi.encodePacked(_fromToken, _toToken, _unirouter));
        bytes32 _swapKeyReverse = keccak256(abi.encodePacked(_toToken, _fromToken, _unirouter));
        address _router = _unirouter;

        _checkRouter(_router);

        // setting path
        swapPaths[_swapKey] = SwapPath(RouterType.UniV2, _router, _path);

        // setting also reverse path
        swapPaths[_swapKeyReverse] = SwapPath(RouterType.UniV2, _router, reversePath(_path));
    }

    /// @dev Checks that tokens in path are whitelisted
    /// @notice Override this to skip checks
    function _checkPath(address[] memory _path) internal virtual {
        for (uint256 i; i < _path.length; i++) {
            //console.log(_path[i]);
            require(whitelistedAddresses.contains(_path[i]), 'token-not-whitelisted');
        }
    }

    /// @dev Checks that router for swap is whitelisted
    /// @notice Override this to skip checks
    function _checkRouter(address _router) internal virtual {
        require(whitelistedAddresses.contains(_router), 'router-not-whitelisted');
    }

    function _swap(
        SwapPath memory _swapPath,
        uint256 _amount,
        RouterType _type
    ) internal virtual returns (uint256 _toTokenAmount) {
        address _fromToken = _swapPath.path[0];
        address _toToken = _swapPath.path[_swapPath.path.length - 1];

        // check for same token
        if (_fromToken == _toToken) return _amount;

        IERC20(_fromToken).safeApprove(_swapPath.unirouter, 0);
        IERC20(_fromToken).safeApprove(_swapPath.unirouter, type(uint256).max);

        // debugging: uncomment this block
        // console.log("router:", _swapPath.unirouter);
        // console.log("_fromToken:", IERC20Metadata(_fromToken).symbol());
        // console.log("_toToken", IERC20Metadata(_toToken).symbol());
        // console.log("_path:");
        // console.log("_amountIn", _amount);
        // balanceOf _fromToken
        // console.log("balanceOf _fromToken", IERC20(_fromToken).balanceOf(address(this)));
        // for (uint i; i < _swapPath.path.length; i++) {
        //     console.log(_swapPath.path[i], " - ", IERC20Metadata(_swapPath.path[i]).symbol());
        // }

        uint256 _toTokenBefore = IERC20(_toToken).balanceOf(address(this));

        if (_type == RouterType.UniV2) {
            IUniswapV2Router02(_swapPath.unirouter).swapExactTokensForTokensSupportingFeeOnTransferTokens(_amount, 1, _swapPath.path, address(this), block.timestamp);
        } else if (_type == RouterType.Solidly) {
            ISolidlyRouter(_swapPath.unirouter).swapExactTokensForTokens(_amount, 1, _pathToSolidlyPath(_amount, _swapPath.unirouter, _swapPath.path), address(this), block.timestamp);
        } else {
            revert('invalid-router-type');
        }

        _toTokenAmount = IERC20(_toToken).balanceOf(address(this)) - _toTokenBefore;
    }

    function _pathToSolidlyPath(
        uint256 _amount,
        address _router,
        address[] memory _path
    ) internal view returns (ISolidlyRouter.route[] memory) {
        ISolidlyRouter.route[] memory _solidlyPath = new ISolidlyRouter.route[](_path.length - 1);

        for (uint256 i; i < _path.length - 1; i++) {
            // check max out
            (uint256 amount, bool stable) = ISolidlyRouter(_router).getAmountOut(_amount, _path[i], _path[i + 1]);

            _solidlyPath[i] = ISolidlyRouter.route(_path[i], _path[i + 1], stable);
            _amount = amount;
        }

        return _solidlyPath;
    }

    function _estimateSwap(
        SwapPath memory _swapPath,
        uint256 _amount,
        RouterType _type
    ) internal view virtual returns (uint256) {
        address _fromToken = _swapPath.path[0];
        address _toToken = _swapPath.path[_swapPath.path.length - 1];

        // check for same token
        if (_fromToken == _toToken) return _amount;

        // Uniswap
        if (_type == RouterType.UniV2) {
            // can revert if pair doesn't exist
            try IUniswapV2Router02(_swapPath.unirouter).getAmountsOut(_amount, _swapPath.path) returns (uint256[] memory amounts) {
                return amounts[amounts.length - 1];
            } catch {
                return 0;
            }
        }

        // Solidly
        if (_type == RouterType.Solidly) {
            // converting path
            ISolidlyRouter.route[] memory _solidlyPath = _pathToSolidlyPath(_amount, _swapPath.unirouter, _swapPath.path);

            // can revert if pair doesn't exist
            try ISolidlyRouter(_swapPath.unirouter).getAmountsOut(_amount, _solidlyPath) returns (uint256[] memory amounts) {
                return amounts[amounts.length - 1];
            } catch {
                console.log('something reverted, returning 0');
                return 0;
            }
        }

        return 0;
    }

    function _addRouter(address _router) internal virtual {
        require(_router != address(0), 'invalid-router');
        require(validRouter[_router] == false, 'router-already-added');
        routers.push(_router);
        validRouter[_router] = true;
        whitelistedAddresses.add(_router);
    }
}

MatrixSwapHelperV2.sol

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

Ownable.sol

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "IERC20.sol";
import "Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

SafeERC20.sol

//SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

import "Ownable.sol";
import "SafeERC20.sol";
import "IERC20.sol";
import "IUniswapV2Router02.sol";
import "IUniswapV2Pair.sol";
import "ISolidlyRouter.sol";
import "IWETH.sol";
import "IMatrixVault.sol";
import "MatrixSwapHelperV2.sol";
import "console.sol";

contract ZapperFtmV3 is MatrixSwapHelperV2, Ownable {
    using SafeERC20 for IERC20;
    using EnumerableSet for EnumerableSet.AddressSet;

    event DefaultRouterChanged(address indexed _oldRouter, address indexed _newRouter);
    event CustomRouterSet(address indexed _lpToken, address indexed _customRouter);

    event ZapIn(address indexed _user, address indexed _vault, address indexed _want, uint256 _amountIn);

    event ZapOut(address indexed _user, address indexed _vault, address indexed _want, uint256 _amountOut);

    string public constant VERSION = '1.2';

    address public constant WETH = 0x21be370D5312f44cB42ce377BC9b8a0cEF1A4C83;
    address public constant USDC = 0x04068DA6C83AFCFA0e13ba15A6696662335D5B75;
    address internal constant SPOOKY_ROUTER = 0xF491e7B69E4244ad4002BC14e878a34207E38c29;
    address internal constant WIGO_ROUTER = 0x5023882f4D1EC10544FCB2066abE9C1645E95AA0;
    address internal constant EQUALIZER_ROUTER = 0x1A05EB736873485655F29a37DEf8a0AA87F5a447;
    address internal constant BASED_ROUTER = 0xaf2098E3AF3AC27a3a9362ACa2D883eFC36c7FAC;

    /// @dev Mapping of LP ERC20 -> Router
    /// In order to support a wider range of UniV2 forks
    mapping(address => address) public customRouter;

    mapping(address => MatrixSwapHelperV2.RouterType) public routerToType;

    /// @dev Mapping of Factory -> Router to retrieve
    /// the default router for LP token
    mapping(address => address) public factoryToRouter;

    /// @notice SushiSwap ROUTER AS DEFAULT FOR LP TOKENS AND SWAPS
    constructor() MatrixSwapHelperV2(SPOOKY_ROUTER) {
        // Factory to Router
        // spookyswap
        factoryToRouter[0x152eE697f2E276fA89E96742e9bB9aB1F2E61bE3] = SPOOKY_ROUTER;
        routerToType[SPOOKY_ROUTER] = MatrixSwapHelperV2.RouterType.UniV2;

        // wigoswap
        factoryToRouter[0xC831A5cBfb4aC2Da5ed5B194385DFD9bF5bFcBa7] = WIGO_ROUTER;
        routerToType[WIGO_ROUTER] = MatrixSwapHelperV2.RouterType.UniV2;

        // based
        factoryToRouter[0x407C47E3FDB7952Ee53aa232B5f28566A024A759] = BASED_ROUTER;
        routerToType[BASED_ROUTER] = MatrixSwapHelperV2.RouterType.UniV2;

        // equalizer
        factoryToRouter[0xc6366EFD0AF1d09171fe0EBF32c7943BB310832a] = EQUALIZER_ROUTER;
        routerToType[EQUALIZER_ROUTER] = MatrixSwapHelperV2.RouterType.Solidly;

        // pushing routers
        routers.push(SPOOKY_ROUTER);
        routers.push(WIGO_ROUTER);
        routers.push(EQUALIZER_ROUTER);
        routers.push(BASED_ROUTER);

        // setup already known ones
        customRouter[0x8418BAb773ABF430907b39B7dB6A6F8318A9210e] = EQUALIZER_ROUTER;
        customRouter[0x11a0779eA92176298b7A2760AE29fC9Ce1aD47b4] = EQUALIZER_ROUTER;
        customRouter[0x3d6c56f6855b7Cc746fb80848755B0a9c3770122] = EQUALIZER_ROUTER;
        customRouter[0x76fa7935a5AFEf7fefF1C88bA858808133058908] = EQUALIZER_ROUTER;
        customRouter[0xD3c3E365d84Fc4e7e66244E00e5E2271176FF61E] = EQUALIZER_ROUTER;
        customRouter[0x783A3Fb9F88dF5A89fB3a5e595254Fa8f7b97b48] = EQUALIZER_ROUTER;
        customRouter[0xDc935Ffe9f9C972B7b304E0b7E61Eb774037E394] = EQUALIZER_ROUTER;
        customRouter[0xFfE9C27F0a12dABe5c5Bd46D144a5c0140725566] = EQUALIZER_ROUTER;
        customRouter[0x7547d05dFf1DA6B4A2eBB3f0833aFE3C62ABD9a1] = EQUALIZER_ROUTER;
        customRouter[0xE3bD349BDb8203C15426b2d273f57568E658F843] = EQUALIZER_ROUTER;
        customRouter[0x558DCA97c224851Cf428cbF244bEC0b897642efC] = EQUALIZER_ROUTER;
        customRouter[0x0272A69b9f7D12489E0E0C756cD645E538A00DDE] = EQUALIZER_ROUTER;
        customRouter[0xDA3E21477F872F30794551D908DE244b8839F723] = EQUALIZER_ROUTER;
        customRouter[0x0f03efdce7A8cE08c238b1a0B5425Fb63Bd44b38] = EQUALIZER_ROUTER;
        customRouter[0x6eB4Eb157C3e6f0576b8ba3C88e8C5D2e6E81D17] = EQUALIZER_ROUTER;
        customRouter[0xe00D5e6535fb48E83C8cabe602242Cc1Bd253cEA] = EQUALIZER_ROUTER;
        customRouter[0x0995F3932B4Aca1ED18eE08D4B0DCf5f74B3c5D3] = EQUALIZER_ROUTER;
    }

    receive() external payable {}

    /// @notice Get swap custom swap paths, if any
    /// @dev Otherwise reverts to default FROMTOKEN-WETH-TOTOKEN behavior
    function getSwapPath(
        address _fromToken,
        address _toToken,
        address _unirouter
    ) public view override returns (SwapPath memory _swapUniV2Path) {
        bytes32 _swapUniV2Key = keccak256(abi.encodePacked(_fromToken, _toToken, _unirouter));
        if (swapPaths[_swapUniV2Key].path.length == 0) {
            if (_fromToken != WETH && _toToken != WETH) {
                address[] memory _path = new address[](3);
                _path[0] = _fromToken;
                _path[1] = WETH;
                _path[2] = _toToken;
                _swapUniV2Path.path = _path;
            } else {
                address[] memory _path = new address[](2);
                _path[0] = _fromToken;
                _path[1] = _toToken;
                _swapUniV2Path.path = _path;
            }
            _swapUniV2Path.unirouter = _unirouter;
        } else {
            return swapPaths[_swapUniV2Key];
        }
    }

    /// @dev Allows owner to set a custom swap path from a token to another
    /// @param _unirouter Can also set a custom unirouter for the swap, or address(0) for default router (spooky)
    function setSwapPath(
        address _fromToken,
        address _toToken,
        address _unirouter,
        address[] memory _path
    ) external onlyOwner {
        _setSwapPath(_fromToken, _toToken, _unirouter, _path);
    }

    function zapToLp(
        address _fromToken,
        address _toLpToken,
        uint256 _amountIn,
        uint256 _minLpAmountOut
    ) external payable {
        uint256 _lpAmountOut = _zapToLp(_fromToken, _toLpToken, _amountIn, _minLpAmountOut);

        IERC20(_toLpToken).safeTransfer(msg.sender, _lpAmountOut);
    }

    function zapToMatrix(
        address _fromToken,
        address _matrixVault,
        uint256 _amountIn,
        uint256 _minLpAmountOut
    ) external payable {
        IMatrixVault _vault = IMatrixVault(_matrixVault);

        address _toLpToken = _vault.want();

        uint256 _lpAmountOut = _zapToLp(_fromToken, _toLpToken, _amountIn, _minLpAmountOut);

        uint256 _vaultBalanceBefore = _vault.balanceOf(address(this));

        IERC20(_toLpToken).safeApprove(_matrixVault, _lpAmountOut);

        _vault.deposit(_lpAmountOut);

        uint256 _vaultAmountOut = _vault.balanceOf(address(this)) - _vaultBalanceBefore;

        require(_vaultAmountOut > 0, 'deposit-in-vault-failed');

        _vault.transfer(msg.sender, _vaultAmountOut);

        emit ZapIn(msg.sender, address(_vault), _toLpToken, _lpAmountOut);
    }

    function unzapFromMatrix(
        address _matrixVault,
        address _toToken,
        uint256 _withdrawAmount,
        uint256 _minAmountOut
    ) external {
        IMatrixVault _vault = IMatrixVault(_matrixVault);
        address _fromLpToken = _vault.want();

        _vault.transferFrom(msg.sender, address(this), _withdrawAmount);
        _vault.withdraw(_withdrawAmount);

        uint256 _amountOut = _unzapFromLp(_fromLpToken, _toToken, IERC20(_fromLpToken).balanceOf(address(this)), _minAmountOut);

        emit ZapOut(msg.sender, address(_vault), _fromLpToken, _amountOut);
    }

    function unzapFromLp(
        address _fromLpToken,
        address _toToken,
        uint256 _amountLpIn,
        uint256 _minAmountOut
    ) external {
        IERC20(_fromLpToken).safeTransferFrom(msg.sender, address(this), _amountLpIn);
        _unzapFromLp(_fromLpToken, _toToken, _amountLpIn, _minAmountOut);
    }

    /// @notice In case tokens got stuck/mistakenly sent here
    function sweepERC20(address _token) external onlyOwner {
        IERC20(_token).safeTransfer(msg.sender, IERC20(_token).balanceOf(_token));
    }

    function addRouter(address _factory, address _router) external onlyOwner {
        require(factoryToRouter[_factory] == address(0), 'already-set');

        factoryToRouter[_factory] = _router;
    }

    function setCustomRouter(address lpToken, address router) external onlyOwner {
        // check if in whitelist
        for (uint256 i = 0; i < routers.length; i++) {
            if (routers[i] == router) {
                break;
            }
            if (i == routers.length - 1) {
                revert('router-not-whitelisted');
            }
        }

        customRouter[lpToken] = router;
    }

    /// @notice Get router for LPToken
    function _getRouter(address _lpToken) internal view virtual returns (address) {
        if (customRouter[_lpToken] != address(0)) return customRouter[_lpToken];

        address _factory = IUniswapV2Pair(_lpToken).factory();
        require(factoryToRouter[_factory] != address(0), 'unsupported-router');

        return factoryToRouter[_factory];
    }

    function getBestSwapPath(
        address fromToken,
        address toToken,
        uint256 amount
    ) public view returns (SwapPath memory _bestSwapPath) {
        address[] memory _routers = routers;
        uint256 _bestAmount = 0;

        for (uint256 i = 0; i < _routers.length; i++) {
            address _router = _routers[i];

            SwapPath memory _swapPath = getSwapPath(fromToken, toToken, _router);
            MatrixSwapHelperV2.RouterType _routerType = routerToType[_router];

            uint256 amountOut = _estimateSwap(_swapPath, amount, _routerType);

            if (amountOut > _bestAmount) {
                _bestAmount = amountOut;
                _bestSwapPath = _swapPath;
            }

            // testing direct path if weth is not present
            if (fromToken != WETH && toToken != WETH) {
                SwapPath memory _swapPathDirect;

                address[] memory _path = new address[](2);
                _path[0] = fromToken;
                _path[1] = toToken;

                _swapPathDirect.path = _path;
                _swapPathDirect.unirouter = _router;

                uint256 amountOutDirect = _estimateSwap(_swapPathDirect, amount, _routerType);

                if (amountOutDirect > _bestAmount) {
                    _bestAmount = amountOutDirect;
                    _bestSwapPath = _swapPathDirect;
                }
            }

            // testing usdc path if usdc is not present
            if (fromToken != USDC && toToken != USDC) {
                SwapPath memory _swapPathUSDC;

                address[] memory _path = new address[](3);
                _path[0] = fromToken;
                _path[1] = USDC;
                _path[2] = toToken;

                _swapPathUSDC.path = _path;
                _swapPathUSDC.unirouter = _router;

                uint256 amountOutUSDC = _estimateSwap(_swapPathUSDC, amount, _routerType);

                if (amountOutUSDC > _bestAmount) {
                    _bestAmount = amountOutUSDC;
                    _bestSwapPath = _swapPathUSDC;
                }
            }
        }

        require(_bestAmount > 0, 'no-path');
        return _bestSwapPath;
    }

    function _getRatio(address _lpToken) internal view returns (uint256) {
        (uint256 opLp0, uint256 opLp1, ) = IUniswapV2Pair(_lpToken).getReserves();
        uint256 lp0Amt = (opLp0 * (10**18)) / (10**IERC20Metadata(IUniswapV2Pair(_lpToken).token0()).decimals());
        uint256 lp1Amt = (opLp1 * (10**18)) / (10**IERC20Metadata(IUniswapV2Pair(_lpToken).token1()).decimals());
        uint256 totalSupply = lp0Amt + (lp1Amt);
        return (lp0Amt * (10**18)) / (totalSupply);
    }

    function _zapToLp(
        address _fromToken,
        address _toLpToken,
        uint256 _amountIn,
        uint256 _minLpAmountOut
    ) internal virtual returns (uint256 _lpAmountOut) {
        if (msg.value > 0) {
            // If you send FTM instead of WETH these requirements must hold.
            require(_fromToken == WETH, 'invalid-from-token');
            require(_amountIn == msg.value, 'invalid-amount-in');
            // Auto-wrap FTM to WETH
            IWETH(WETH).deposit{ value: msg.value }();
        } else {
            IERC20(_fromToken).safeTransferFrom(msg.sender, address(this), _amountIn);
        }

        address _router = _getRouter(_toLpToken);
        address _token0 = IUniswapV2Pair(_toLpToken).token0();
        address _token1 = IUniswapV2Pair(_toLpToken).token1();

        // Uses lpToken' _router as the default router
        // You can override this by using setting a custom path
        // Using setSwapPath
        SwapPath memory swapPathToken0 = getBestSwapPath(_fromToken, _token0, _amountIn / 2);
        SwapPath memory swapPathToken1 = getBestSwapPath(_fromToken, _token1, _amountIn - (_amountIn / 2));

        uint256 _token0Out;
        uint256 _token1Out;
        bool _isStable = false;

        if (routerToType[_router] == MatrixSwapHelperV2.RouterType.Solidly) {
            _isStable = IUniswapV2Pair(_toLpToken).stable();
        }

        if (!_isStable) {
            _token0Out = _swap(swapPathToken0, _amountIn / 2, routerToType[swapPathToken0.unirouter]);

            _token1Out = _swap(swapPathToken1, _amountIn - (_amountIn / 2), routerToType[swapPathToken1.unirouter]);
        } else {
            uint256 ratio = _getRatio(_toLpToken);
            uint256 _amount0In = (_amountIn * ratio) / 10**18;
            uint256 _amount1In = _amountIn - _amount0In;
            _token0Out = _swap(swapPathToken0, _amount0In, routerToType[swapPathToken0.unirouter]);
            _token1Out = _swap(swapPathToken1, _amount1In, routerToType[swapPathToken1.unirouter]);
        }

        IERC20(_token0).safeApprove(_router, 0);
        IERC20(_token1).safeApprove(_router, 0);
        IERC20(_token0).safeApprove(_router, _token0Out);
        IERC20(_token1).safeApprove(_router, _token1Out);

        uint256 _lpBalanceBefore = IERC20(_toLpToken).balanceOf(address(this));

        _addLiquidity(_router, _token0, _token1, _token0Out, _token1Out, _isStable);

        _lpAmountOut = IERC20(_toLpToken).balanceOf(address(this)) - _lpBalanceBefore;

        require(_lpAmountOut >= _minLpAmountOut, 'slippage-rekt-you');
    }

    function _addLiquidity(
        address _router,
        address _token0,
        address _token1,
        uint256 _token0Out,
        uint256 _token1Out,
        bool _stable
    ) internal virtual {
        MatrixSwapHelperV2.RouterType _routerType = routerToType[_router];

        if (_routerType == MatrixSwapHelperV2.RouterType.UniV2) {
            IUniswapV2Router02(_router).addLiquidity(_token0, _token1, _token0Out, _token1Out, 0, 0, address(this), block.timestamp);
        } else if (_routerType == MatrixSwapHelperV2.RouterType.Solidly) {
            ISolidlyRouter(_router).addLiquidity(_token0, _token1, _stable, _token0Out, _token1Out, 0, 0, address(this), block.timestamp);
        } else {
            revert('invalid-router-type');
        }
    }

    function _removeLiquidity(
        address _router,
        address _token0,
        address _token1,
        uint256 _amountLpIn,
        bool _stable
    ) internal virtual {
        MatrixSwapHelperV2.RouterType _routerType = routerToType[_router];

        if (_routerType == MatrixSwapHelperV2.RouterType.UniV2) {
            IUniswapV2Router02(_router).removeLiquidity(_token0, _token1, _amountLpIn, 0, 0, address(this), block.timestamp);
        } else if (_routerType == MatrixSwapHelperV2.RouterType.Solidly) {
            ISolidlyRouter(_router).removeLiquidity(_token0, _token1, _stable, _amountLpIn, 0, 0, address(this), block.timestamp);
        } else {
            revert('invalid-router-type');
        }
    }

    function _unzapFromLp(
        address _fromLpToken,
        address _toToken,
        uint256 _amountLpIn,
        uint256 _minAmountOut
    ) internal virtual returns (uint256 _amountOut) {
        address _router = _getRouter(_fromLpToken);

        address _token0 = IUniswapV2Pair(_fromLpToken).token0();
        address _token1 = IUniswapV2Pair(_fromLpToken).token1();

        IERC20(_fromLpToken).safeApprove(_router, 0);
        IERC20(_fromLpToken).safeApprove(_router, _amountLpIn);

        bool _isStable = false;

        if (routerToType[_router] == MatrixSwapHelperV2.RouterType.Solidly) {
            _isStable = IUniswapV2Pair(_fromLpToken).stable();
        }

        _removeLiquidity(_router, _token0, _token1, _amountLpIn, _isStable);

        // Uses lpToken' _router as the default router
        // You can override this by using setting a custom path
        // Using setSwapPath
        SwapPath memory swapPathToken0 = getBestSwapPath(_token0, _toToken, IERC20(_token0).balanceOf(address(this)));
        SwapPath memory swapPathToken1 = getBestSwapPath(_token1, _toToken, IERC20(_token1).balanceOf(address(this)));

        MatrixSwapHelperV2.RouterType path0RouterType = routerToType[swapPathToken0.unirouter];
        MatrixSwapHelperV2.RouterType path1RouterType = routerToType[swapPathToken1.unirouter];

        _swap(swapPathToken0, IERC20(_token0).balanceOf(address(this)), path0RouterType);
        _swap(swapPathToken1, IERC20(_token1).balanceOf(address(this)), path1RouterType);

        _amountOut = IERC20(_toToken).balanceOf(address(this));

        require(_amountOut >= _minAmountOut, 'slippage-rekt-you');

        if (_toToken == WETH) {
            IWETH(WETH).withdraw(_amountOut);

            (bool _success, ) = msg.sender.call{ value: _amountOut }('');
            require(_success, 'ftm-transfer-failed');
        } else {
            IERC20(_toToken).transfer(msg.sender, _amountOut);
        }
    }

    function _checkPath(address[] memory _path) internal override {}

    function _checkRouter(address _router) internal override {}
}

ZapperFtmV3.sol

console.sol

__ANONYMOUS__

0x0912ff276dc3de2ca041dd0eefaf6e89297244db